Evinrude Powerhead Bolts
I need to access a connection rod / piston
assembly in my Evinrude 1977 235 H. P. Where
are the bolts that hold the Powerhead on and how do I get to them?
Julian E. Rice
are under the lower cowl - remove the lower cowl and they are around the
base. Five per side and 3 more in the rear by the exhaust manifold. Sounds
like you may be biting off a bigger project than you realize. There are
needle bearings and such in the powerhead and I wouldn't attempt this
unless you have the experience.
Please submit whatever questions you have to IHRTechTalk@yahoo.com. All questions and answers selected will be displayed on this page as they come in. Note: though all boaters are welcome, priority may be given to I.H.R. members. Randy can not be held responsible for any advice given. Though his information and expertise is second to none, he has no control over what you do with your boat. It is up to you to boat safely and act responsibly, and his advice is only to be used as a guidance for your high performance boat/motor of which you are the one responsible for the risks involved.
I.H.R. l History
Pictures l Feature
Article l Tech